Cruise Control Indicator Malfunction

Diagnostic Instructions Perform the Diagnostic System Check prior to using this diagnostic procedure: Diagnostic System Check - Vehicle Review the description of Strategy Based Diagnosis: Strategy Based Diagnosis An overview of each diagnostic category can be found here: Diagnostic Procedure Instructions Circuit/System Description For an overview of the component/system, refer to: Cruise Control Description and Operation Reference Information Schematic Reference Cruise Control Schematics Connector End View Reference Master Electrical Component List Electrical Information Reference Circuit Testing Connector Repairs Testing for Intermittent Conditions and Poor Connections Wiring Repairs DTC Type Reference Powertrain Diagnostic Trouble Code (DTC) Type Definitions Scan Tool Reference Control Module References Circuit/System Verification

1. Ignition » On / Vehicle » In Service Mode
2. Perform the scan tool control function: Instrument Panel Cluster Assembly » Illuminate All Indicators
3. Verify the component turns On and Off: Cruise Control Indicator ⇒ If the component does not turn On and Off Replace the component: Instrument Panel Cluster Assembly ⇓ If the component turns On and Off
4. All OK. Repair Instructions Perform the Diagnostic Repair Verification after completing the repair: Diagnostic Repair Verification For control module replacement, programming, and setup refer to: Control Module References