Input Shaft Pilot Bearing Replacement (1)

Input Shaft Pilot Bearing Replacement Special Tools DT-48212 Input Shaft Pilot Bearing Installer J-8092 Universal Driver Equivalent regional tools: Special Tools. Removal Procedure

Input Shaft Pilot Bearing Replacement (1) — figure 1

1. Using DT-48212 Input Shaft Pilot Bearing Installer (2), J-8092 Universal Driver (3), and an arbor press, remove the input shaft pilot bearing by going through the front of the input gear. Installation Procedure

2. Install the bearing using the small side of the DT-48212 Input Shaft Pilot Bearing Installer (2) and the J-8092 Universal Driver (3).

3. Press the bearing until the tool bottoms on the input shaft.