Front Seat Vent Fan Mat Replacement

Warning

To avoid personal injury, perform a passenger presence sensor rezeroing/ learn on the passenger presence system whenever you remove or replace the seat cushion trim. Failure to do so may cause the system to malfunction.

Warning

The passenger seat cushion assembly is serviced in a kit with the airbag front passenger presence module, cushion pad (and if equipped, heat mat, vent mat, vent mat support, comfort pads). All components in the service kit are assembled and calibrated as a unit and must be replaced as a complete assembly to prevent possible injury to the occupant. Using only some of the components in the service kit will cause the passenger presence system to operate improperly. Removal Procedure

Front Seat Vent Fan Mat Replacement — figure 1

1. Front Seat Cushion Cover and Pad (1) » Remove — Front Seat Cushion Cover and Pad Removal and Installation

Front Seat Vent Fan Mat Replacement — figure 2

Note

Using a heat gun, apply low heat to soften the adhesive prior to removal.

2. Remove the front seat vent fan mat (2) from the front seat cushion cover and pad (1).

3. Transfer components as necessary. Installation Procedure

4. Install the front seat vent fan mat (2) onto the front seat cushion cover and pad (1).

5. Front Seat Cushion Cover and Pad (1) » Install — Front Seat Cushion Cover and Pad Removal and Installation