Skip to content
Tahoe / Yukon Service Manual

3rd Row Seat Head Restraint Replacement

Removal Procedure

3rd Row Seat Head Restraint Replacement — figure 1
3rd Row Seat Head Restraint Replacement — figure 1
  1. Reposition the seat as necessary.
  2. Using a suitable plastic trim tool, release the 3rd row seat anchor plate bezel plastic retainers.
  3. 3rd Row Seat Anchor Plate Bezel - Outboard (1) » Remove
3rd Row Seat Head Restraint Replacement — figure 2
3rd Row Seat Head Restraint Replacement — figure 2
  1. { If equipped } Using a suitable plastic trim tool, release the retaining tabs.
  2. { If equipped } 3rd Row Seat Back Latch Release Handle Bezel (1) » Remove
  3. If equipped, feed the 3rd row seat pull strap through the bezel (1) to remove.
3rd Row Seat Head Restraint Replacement — figure 3
3rd Row Seat Head Restraint Replacement — figure 3
  1. Disengage the J-channel retainers from the seat back frame.
  2. Unzip the left and right seat back cover zippers.
  3. Reposition the seat back cover and pad as necessary to access the 3rd row seat head restraint cable (2).
  4. Using a suitable flat-bladed tool, open the 3rd row seat head restraint cable cover (1).
  5. Release the 3rd row seat head restraint cable (2).
3rd Row Seat Head Restraint Replacement — figure 4
3rd Row Seat Head Restraint Replacement — figure 4

  1. Using a suitable pointed or flat bladed tool, push the 3rd row seat head restraint guide clip (1)  rearward while pulling upward on the 3rd row seat head restraint (2).

  2. 3rd Row Seat Head Restraint (2) » Remove Installation Procedure

  3. 3rd Row Seat Head Restraint (2) » Install

  4. Install the 3rd row seat head restraint cable (2).

  5. Close the 3rd row seat head restraint cable cover (1).

  6. Position the seat back cover and pad to the original location.

  1. Zip the left and right seat back cover zippers.

  2. Engage the J-channel retainers to the seat back frame.

  3. If equipped, feed the 3rd row seat pull strap through the bezel (1) to install.

  4. { If equipped } 3rd Row Seat Back Latch Release Handle Bezel (1) » Install

  5. 3rd Row Seat Anchor Plate Bezel - Outboard (1) » Install

  6. Return the seat to its original position.