Floor Front Air Outlet Duct Replacement - Right Side
Removal Procedure

- Using a flat-bladed plastic trim tool, release the retaining clips.
- Front Floor Console Lower Applique (1) » Remove

- Using a flat-bladed plastic trim tool, release the retaining clips.
- Front Floor Console Applique (1) » Remove

- Using a flat-bladed plastic trim tool, release the retaining clips.
- Instrument Panel Fuse Block Access Hole Cover (1) » Remove

- Using a flat-bladed plastic trim tool, release the retaining clips.
- Instrument Panel Trim Plate Applique (1) » Remove

- Using a flat-bladed plastic trim tool, release the retaining clips.
- Instrument Panel Center Trim Plate Applique (1) » Remove

- Instrument Panel Upper Trim Panel Bolt (1) » Remove [6x]
- Using a flat-bladed plastic trim tool, release the retaining clips.
- Instrument Panel Trim Pad (2) » Remove
- Disconnect the electrical connector.

- Instrument Panel Compartment Bolt (1) » Remove [2x]
- Using a flat-bladed plastic trim tool, release the retaining clips.
- Instrument Panel Lower Trim Panel Outer Filler (2) » Remove

- Instrument Panel Lower Trim Panel Bolt (1) » Remove
- Using a flat-bladed plastic trim tool, release the retaining clips.
- Instrument Panel Lower Center Trim Plate Applique (2) » Remove

- Using a flat-bladed plastic trim tool, release the retaining clips.
- Instrument Panel Lower Trim Panel (1) » Remove

- Instrument Panel Lower Insulator Retainer (1) » Remove [3x]

- Instrument Panel Lower Trim Panel Insulator (1) » Remove

- Instrument Panel Compartment Bolt (1) » Remove [10x]

- Instrument Panel Compartment (1) » Remove

- Heater and Air Conditioning Evaporator and Blower Module Bolt (1) » Remove [2x]

-
Unclip the wiring harness from the floor front air outlet duct.
-
Floor Front Air Outlet Duct - Right Side (1) » Remove Installation Procedure
-
Floor Front Air Outlet Duct - Right Side (1) » Install
-
Clip the wiring harness onto the floor front air outlet duct.
-
Heater and Air Conditioning Evaporator and Blower Module Bolt (1) » Install and tighten [2x] — Fastener Specifications
-
Instrument Panel Compartment (1) » Install
-
Instrument Panel Compartment Bolt (1) » Install and tighten [10x] — Fastener Specifications
-
Instrument Panel Lower Trim Panel Insulator (1) » Install
-
Instrument Panel Lower Insulator Retainer (1) » Install [3x]
-
Instrument Panel Lower Trim Panel (1) » Install
-
Instrument Panel Lower Center Trim Plate Applique (2) » Install
-
Instrument Panel Lower Trim Panel Bolt (1) » Install and tighten — Fastener Specifications
-
Instrument Panel Lower Trim Panel Outer Filler (2) » Install
-
Instrument Panel Compartment Bolt (1) » Install and tighten [2x] — Fastener Specifications
-
Connect the electrical connector.
-
Instrument Panel Trim Pad (2) » Install
-
Instrument Panel Upper Trim Panel Bolt (1) » Install and tighten [6x] — Fastener Specifications
-
Instrument Panel Center Trim Plate Applique (1) » Install
-
Instrument Panel Trim Plate Applique (1) » Install
-
Instrument Panel Fuse Block Access Hole Cover (1) » Install
-
Front Floor Console Applique (1) » Install
-
Front Floor Console Lower Applique (1) » Install