Rear Seat Hinge Finish Cover Replacement - Inboard (Bench)

Rear Seat Hinge Finish Cover Replacement - Inboard (Bench) Removal Procedure

Rear Seat Hinge Finish Cover Replacement - Inboard (Bench) — figure 1

1. Place the opposite rear seat in the fold and tumble position.
2. Front Seat Bolt (1) » Remove
3. Using a suitable plastic trim tool, release the retaining tabs.
4. Rear Seat Recliner Outer Finish Cover - Inboard (2) » Remove

Rear Seat Hinge Finish Cover Replacement - Inboard (Bench) — figure 2

5. Depress the retaining tab while pulling the rear seat hinge finish cover (1) inward then upward to release from the rear seat hinge.

6. Rear Seat Hinge Finish Cover - Inboard (1) » Remove Installation Procedure

7. Rear Seat Hinge Finish Cover - Inboard (1) » Install

8. Rear Seat Recliner Outer Finish Cover - Inboard (2) » Install

Caution

Refer to Fastener Caution.

3. Front Seat Bolt (1) » Install and tighten — Fastener Specifications
4. Return the opposite rear seat to the original position.