Skip to content
Tahoe / Yukon Service Manual

Mass Airflow Sensor Replacement

Engine Controls and Fuel - 5.3L L84 or 6.2L L87 | Repair Instructions | Document ID: 5501401 Removal Procedure

Mass Airflow Sensor Replacement — figure 1
Mass Airflow Sensor Replacement — figure 1

  1. Disconnect the mass airflow sensor electrical connector.

  2. Mass Airflow Sensor Bolt (1) » Remove [2x]

  3. Mass Airflow Sensor (2) » Remove Installation Procedure

  4. Mass Airflow Sensor (2) » Install

  1. Mass Airflow Sensor Bolt (1) » Install and tighten [2x] — Fastener Specifications
  2. Connect the mass airflow sensor electrical connector.