Suspension Strut and Shock Absorber Testing - On Vehicle
| Step | Action | Yes | No |
|---|---|---|---|
| 1 | Did you review the General Diagnosis Symptoms and perform the necessary inspections? | Go to Step 2 | Go to Symptoms - Suspension General Diagnosis |
| 2 | Verify that the customer’s concern is present. Does the vehicle operate normally? | System OK | Go to Step 3 |
| 3 | Note: A light film of oil on the top portion of the shock reservoir is normal. Inspect each strut or shock absorber for external fluid leakage. Is a strut or shock absorber leaking? | Go to Step 5 | Go to Step 4 |
| 4 | 1. Use your hands to lift up and push down each corner of the vehicle 3 times. 2. Remove your hands from the vehicle. 3. Locate a shock or strut that exceeds 2 cycles. Did you locate shock or strut that exceeds 2 cycles? | Go to Step 5 | Go to Step 6 |
| 5 | Note: Inspect the vehicle trim height in order to correct any possible causes of shock/strut failures. Trim Height Inspection. Replace the strut or shock absorber. Front Shock Absorber and Spring Removal and Installation - Left Side Front Shock Absorber and Spring Removal and Installation - Right Side Rear Shock Absorber and Spring Removal and Installation Did you complete the repair? | Go to Step 6 | — |
| 6 | Operate the vehicle to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |