Skip to content
Tahoe / Yukon Service Manual

Front Bumper Fascia Tow Eye Access Hole Cover Replacement

Front Bumper Fascia Tow Eye Access Hole Cover Replacement Removal Procedure

Front Bumper Fascia Tow Eye Access Hole Cover Replacement — figure 1
Front Bumper Fascia Tow Eye Access Hole Cover Replacement — figure 1

  1. Using a small Flat-Bladed tool, insert into left side opening and release the retainers.

  2. Using needle nose pliers release the v-notch hook from the retainer hole in front bumper fascia and remove tow eye cover. (1) Installation Procedure

  3. Install the Tow eye cover. (1)