Transfer Case Four Wheel Drive Actuator Lever Shaft Bearing Replacement - Rear (1)

Transfer Case Four Wheel Drive Actuator Lever Shaft Bearing Replacement - Rear Special Tools J-8092 Universal Driver For equivalent regional tools, refer to Special Tools Removal Procedure

Transfer Case Four Wheel Drive Actuator Lever Shaft Bearing Replacement - Rear (1) — figure 1

1. Remove the transfer case four wheel drive actuator lever shaft bearing (1) from the rear case half. Installation Procedure

Transfer Case Four Wheel Drive Actuator Lever Shaft Bearing Replacement - Rear (1) — figure 2

Note

Ensure the printing on the bearing is facing upward.

1. Press the transfer case four wheel drive actuator lever bearing (1) with a suitable adapter and the J-8092 Universal Driver (3) until the transfer case four wheel drive actuator lever bearing  (1) bottoms on the front case half.