Output Carrier Assembly and Output Carrier Thrust Bearings Removal (2WD)

Automatic Transmission - 10L80 MHS MQC | Repair Instructions - Off Vehicle | Document ID: 5539069 Output Carrier Assembly and Output Carrier Thrust Bearings Removal (2WD) Single Use Fasteners and Components Output Shaft Seal [2x] Special Tools DT-50921 Output Carrier Lifter J-26941 Bushing and Bearing Remover Equivalent regional tools: Special Tools

Output Carrier Assembly and Output Carrier Thrust Bearings Removal (2WD) — figure 1

1. Output Carrier Thrust Bearing Assembly (1) » Remove
2. Install DT-50921 Output Carrier Lifter (3) and J-26941 Bushing and Bearing Remover (2) to the Output Carrier Assembly (4).
3. Output Carrier Assembly (4) » Remove
4. Output Carrier Thrust Bearing Assembly (5) » Remove

Output Carrier Assembly and Output Carrier Thrust Bearings Removal (2WD) — figure 2

1. Output Shaft Seal (1) » Remove and DISCARD [2x]