DTC P0601-P0607, P060A-P060C

DTC P0601-P0607, P060A-P060C, P0610, P062F, P0630, P0634, P064F, P06B8, P16E9-P16F3, P16F9, P16FD, P16FE, P262B, P30D6-P30DD, or P3186 Diagnostic Instructions Perform the Diagnostic System Check prior to using this diagnostic procedure: Diagnostic System Check - Vehicle Review the description of Strategy Based Diagnosis: Strategy Based Diagnosis An overview of each diagnostic category can be found here: Diagnostic Procedure Instructions DTC Descriptor Control Module Read Only Memory Performance DTC P0601 Control Module Not Programmed DTC P0602 Control Module Long Term Memory Reset DTC P0603 Control Module Random Access Memory Performance DTC P0604 Control Module Programming Read Only Memory Performance DTC P0605 Control Module Processor Performance DTC P0606 Control Module Performance DTC P0607 Control Module Monitoring Processor Performance DTC P060A Control Module Analog to Digital Converter Performance DTC P060B Control Module Main Processor Performance DTC P060C Control Module Vehicle Options Incorrect DTC P0610 Control Module Long Term Memory Performance DTC P062F VIN Not Programmed or Mismatched - Engine/Powertrain Control Module DTC P0630 Control Module Overtemperature DTC P0634 Unauthorized Calibration Detected DTC P064F Control Module Non-Volatile Random Access Memory DTC P06B8 Control Module Serial Peripheral Interface Bus 2 DTC P16E9 Control Module Serial Peripheral Interface Bus 3 DTC P16EA Control Module Serial Peripheral Interface Bus 4 DTC P16EB Control Module Serial Peripheral Interface Bus 5 DTC P16EC Control Module Serial Peripheral Interface Bus 6 DTC P16ED Control Module Serial Peripheral Interface Bus 7 DTC P16EE Control Module Serial Peripheral Interface Bus 8 DTC P16EF Control Module Serial Peripheral Interface Bus 1 DTC P16F0 Control Module Serial Peripheral Interface (SPI) Signal Message Counter Incorrect DTC P16F1 Control Module Transmission Direction Switch Input Circuitry Performance DTC P16F2 Control Module Redundant Memory Performance DTC P16F3 Control Module Wake-Up Not Detected DTC P16FD DTC P16FE Control Module Unexpected Wake-Up Detected DTC P262B Control Module Power Off Timer Performance DTC P30D6 Control Module Processor Serial Peripheral Interface Bus 1 DTC P30D7 Control Module Processor Serial Peripheral Interface Bus 2 DTC P30D8 Control Module Processor Serial Peripheral Interface Bus 3 DTC P30D9 Control Module Processor Serial Peripheral Interface Bus 4 DTC P30DA Control Module Processor Serial Peripheral Interface Bus 5 DTC P30DB Control Module Processor Serial Peripheral Interface Bus 6 DTC P30DC Control Module Processor Serial Peripheral Interface Bus 7 DTC P30DD Control Module Processor Serial Peripheral Interface Bus 8 DTC P3186 Control Module Security Peripheral Hardware Performance For symptom byte information, refer to Symptom Byte List. Circuit/System Description This diagnostic applies to internal microprocessor integrity conditions within the control module. This diagnostic also addresses if the control module is not programmed. The control module monitors its ability to read and write to the memory. It also monitors a timing function. No external circuits are involved. Conditions for Running the DTC The ignition is ON or the vehicle is in service mode. The system voltage is greater than 9.5 V. Conditions for Setting the DTC The control module detects an internal malfunction or incomplete programming. Action Taken When the DTC Sets DTCs P0601-P0607, P060A-P060C, P0610, P0630, P06B8, P16E9-P16F0, P30D6-P30DD, and P3186 are type A DTCs. DTCs P0606 and P0607 set by K9 Body Control Module are type B DTCs. DTCs P16FD and P262B are type B DTCs. DTCs P062F and P16FE are type C DTCs. Conditions for Clearing the DTC DTCs P0601-P0607, P060A-P060C, P0610, P0630, P06B8, P16E9-P16F0, P30D6-P30DD, and P3186 are type A DTCs. DTCs P0606 and P0607 set by K9 Body Control Module are type B DTCs. DTCs P16FD and P262B are type B DTCs. DTCs P062F and P16FE are type C DTCs. Reference Information Schematic Reference Data Communication Schematics Control Module References Connector End View Reference Master Electrical Component List Description and Operation Data Link Communications Description and Operation Electrical Information Reference Circuit Testing Connector Repairs Testing for Intermittent Conditions and Poor Connections Wiring Repairs DTC Type Reference Powertrain Diagnostic Trouble Code (DTC) Type Definitions Scan Tool References Control Module References for scan tool information Circuit/System Verification

Note

This diagnostic procedure is applicable to most control modules, but not all. Refer to Diagnostic Trouble Code (DTC) List - Vehicle to check if a separate diagnostic procedure is available for the control module setting the DTCs listed in the DTC Descriptor section and follow that diagnostic procedure. If a separate diagnostic procedure is not available for the control module setting these DTCs, proceed to the verification steps below. If the DTC is stored only as a history DTC and not retrieved as a current DTC, do not replace the control module.

1. Ignition ON/Vehicle in Service Mode.
2. Verify DTC P0602, P0610, P0630, or P064F is not set. ⇒ If any of the DTCs are set 2.1. Perform all necessary programming and setup procedures for the control module that sets the DTC. 2.2. Verify the DTC does not set. ⇒ If the DTC sets, replace the control module that sets the DTC. ⇓ If the DTC does not set 2.3. All OK. ⇓ If none of the DTCs are set
3. Verify DTC P0601, P0603, P0604, P0605, P0606, P0607, P060A, P060B, P060C, P062F, P0634, P06B8, P16E9, P16EA, P16EB, P16EC, P16ED, P16EE, P16EF, P16F0, P16F3, P16FD, P16FE, P262B, P30D6, P30D7, P30D8, P30D9, P30DA, P30DB, P30DC, P30DD, or P3186 is not set. ⇒ If any of the DTCs are set Replace the control module that sets the DTC. ⇓ If none of the DTCs are set
4. All OK Repair Instructions Perform the Diagnostic Repair Verification after completing the repair: Diagnostic Repair Verification For control module replacement, programming, and setup refer to: Control Module References