Skip to content
Tahoe / Yukon Service Manual

Rear Seat Belt Buckle Replacement (40 Percent, Bench Center Buckle without UH5)

Rear Seat Belt Buckle Replacement (40 Percent, Bench Center Buckle without UH5) Removal Procedure

Rear Seat Belt Buckle Replacement (40 Percent, Bench Center Buckle without UH5) — figure 1
Rear Seat Belt Buckle Replacement (40 Percent, Bench Center Buckle without UH5) — figure 1
  1. Place the opposite rear seat in the fold and tumble position.
  2. Front Seat Bolt (1) » Remove
  3. Using a suitable plastic trim tool, release the retaining tabs.
  4. Rear Seat Recliner Outer Finish Cover - Inboard (2) » Remove
Rear Seat Belt Buckle Replacement (40 Percent, Bench Center Buckle without UH5) — figure 2
Rear Seat Belt Buckle Replacement (40 Percent, Bench Center Buckle without UH5) — figure 2
  1. Rear Seat Belt Buckle Bolt (1) » Remove
  2. Rear Seat Belt Buckle (2) » Remove Installation Procedure
  1. Rear Seat Belt Buckle (2) » Install
  1. Rear Seat Belt Buckle Bolt (1) » Install and tighten — Fastener Specifications
  1. Rear Seat Recliner Outer Finish Cover - Inboard (2) » Install
  2. Front Seat Bolt (1) » Install and tighten — Fastener Specifications
  3. Return the opposite rear seat to the original position.